Sea-Fire FM200 Owner's Manual

SEA-FIRE MARINEDIVISION OF METALCRAFT, INC9331 A PHILADEPHIA ROADBALTIMORE, MARYLAND 21237 USATEL 410 687 5500 FAX 410 687 5503Website: www.sea-fire

Supplies, which are not included with your Sea-Fire system and should be at hand beforeindicator light installation, are as follows:1. Five (5) Ampere

2Section 15 — Regulatory InformationU.S. Federal Regulations: The components of this product are either on the TSCA Inventory orexempt (i.e. impuritie

Section 7 — Handling and StorageHandle, transport and store carefully and securely to avoid accidental knocking over or othersevere physical impacts.

APPLICATIONFM-200® (CF3CHFCF3), the extinguishing agent, used in all Sea-Fire “FG” and “FD” series fireextinguishers, is a suitable EPA accepted alter

MANUAL DISCHARGE CABLE ASSEMBLYMODEL LENGTH MODEL LENGTHSMAC-6 6 FT / 1.83 M SMAC-20 20 FT / 6.10MSMAC-8 8 FT / 2.43 M SMAC-22 22 FT / 6.71 MSMAC-10 1

Figure 1INSTALLATIONREAD ENTIRE INSTRUCTION MANUAL AND CYLINDER NAMEPLATE PRIOR TO INSTALLATION.These installation instructions are intended to cover

SPECIFICATION TABLESEA-FIRE “FD” SERIES AUTOMATIC FIRE EXTINGUISHERS4B/360, 4BW/500 CYLINDERSAREA OF MINIMUM MAXIMUM DIAMETER XFD MODEL PROTECTION FM-

d. Following the diagram in Figure 5, install the nut and lock washer on the cable andinsert the cable end through the panel and faceplate hole. Exten

THREE (3) YEAR “FG” AND “FD” SERIES LIMITED WARRANTYWe warranty to the original retail purchaser, all SEA-FIRE extinguishers for a period of three (3)